Your home decoration process is several, and the detail is very much. Wallpaper engineering is the final procedure that the house decorates hard outfit, soft clothing begins. The wallpaper ought to be in the carpentry, color, water and electricity, plastering all hardware finish, and have been cleaned following one time.

1. Floor and skirting are mounted

❖ avoid play keel, saw wood flooring and so on make the wallpaper.

❖ to avoid shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become bended edge phenomenon.

❖ to prevent cutting the line that play a base once large amounts of dirt pollution and wallpaper bruised.

❖ general putty is usually not batch for the basis bottom, first wallpaper won’t be able to cut neatly, susceptible to become warped edge, with a very long time lead to the wallpaper into the coil.

❖ to prevent the range that play basics to get glass glue wallpaper seal up, unable to make the wall of the water molecules emissions, business lead to the line that play a base area wallpaper mildew.

❖ enjoy crural line, likely wall and play crural collection straightness is not enough or have crack, the wallpaper has a mask aperture effect.

2 cover and door are set up

❖ install door first, can avoid the wallpaper destroyed and getting dirty, likewise facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, and also throwing lines) will stain the wallpaper if applied correctly.

❖ door size may possibly have a discrepancy, whenever small size, wallpaper, initial door will appear clear phenomenon; If fully pasted, it is easy to pull the wallpaper the moment installing the door, producing damage to the wallpaper.

Wooden paint can not become PVC Wallcoverings finished with wallpaper, following making wood paint

❖ because carpentry paint the moment construction, atomization, the paint will stick on the wallpaper. And when paint construction, want to carry out protecting to finished merchandise, especially the periphery metope such as cabinet, door, partition should stick protective film, if atomize to metope, to the structure quality of wallpaper is certainly not assured, give a problem very easily.

3. Air conditioning holes

❖ avoid wallpaper damage of drilling hole.

❖ avoid wall vibrations cause the wallpaper off when striking.

❖ to avoid dust particles pollution when punching wallpapers.

The holes of the curtain hanging rod include been made in improve

The positioning of curtain hanger rod support is well designed and holes are made to avoid contaminating the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such as some hard to do wallpaper, prior to paste should be made in advance to 44233449395 6cb9282030 hang the curtain rod holes.

The right way to paste the wallpaper

Eliminate the wall skin: remove the original paint and various other objects on the wall, make use of gypsum powder to repair the cracked portions of the wall, and apply the bandage after leveling; In the event the sand and greyish walls, partition walls, nonetheless also paste glass towel or cloth netting; Several of the low quality partitions or external walls to reach the insulation impact, need to be total of nail plasterboard.

Minimize wallpaper: measure metope height first, cut wallpaper span again, have two kinds of circumstance: do not add cut 5 to 8 centimeters by metope height according to metope height right and left sides size, use as up and down repair edge: to pay wallpaper needs to consider the symmetry of style, reason cut length ought to increase according to genuine circumstance, can lengthen almost eight to 10 centimeters typically.

Coating adhesive solution: wallpapers glue solution with shell in the back of trimming good wallpaper brush, shell out special attention to the full glue around the edge to liquid, in order to ensure the development quality, pasted wall paper and glue in the face of folding place 5-10 mins (attention, nor the exterior force, in order to avoid wallpaper in crease, especially it’s ok cloth) completely through the stuff liquid into the bottom of the paper may be posted, besmear brushs number of wallpapers, every single time and in order to post.

Wall paper construction: it can be to be in commonly door edge or color Angle from go down to paste first wall paper, by scraping plank from go down, by simply introversion outside, blow old fashioned paper paper gently, extrude bubble and superfluous glue the liquid, make wall paper is even close to metope.

Before pasting wallpaper, close off power: when pasting wallpaper, if encounter the place that has power-switch or socket on metope, can turn off total power supply first, cover wall structure paper next all electric power supply and socket, trim two diagonals from centre of gravity point, can show 4 small triangular, reoccupy art tool eliminates all round redundant wallpapers.

Trim cleaning: cut off the extra wallpaper at both equally ends of the uppr and lower ends, and make the blade razor-sharp to stop rough edges. Drop in water with sponge to wipe the glue liquid that remains in the wall paper surface completely clean, lest wall structure paper becomes yellow, following wall paper is dry, if discover a bubble upon the surface, cut start with the knife include glue liquid again press flat can eliminate (with needle tube better)