Mislabeling different batches of 3D Wall covering wallpaper in the same wall structure, resulting in color difference is known as to become a batch of color difference;

Tip: be certain to focus on the wallpaper great deal quantity when buying and building.

Structure of the usage of quality not pass binders, or wallpaper on the back of the glue swab uneven, resulting in wallpaper appear warped advantage, and mistakenly that’s not able to paste;

Tip: match a good horse with a good saddle. Don’t allow the mere truth of having a few bucks value of glue affect your outfit. Brand products are recommended.

During the construction, the joints had been treated with scraping board, which resulted in damage of the lines on both sides of the joints.

Tip: gentle building.

During the structure, the wallpaper surface area is scratched hard with a scraper or a hard towel (with plenty of thread ends), that leads to the inking ink or precious metal, silver, pearl powder and so on falling off.

Hint: when construction, strength ought to be appropriate.

During the construction, because of unwashed hands, dirty towels, and soiled wall structure materials leaking from the joint, the medial side watch at the joint became black color, that was mistaken for the medial side view shadow.

Tip: keep your construction tools clean.

Through the construction, due to the extreme overflow of glue from the joint, a huge amount of clean water was not soaked with a sponge later on, and the joint became yellow several days later on the wall on the wallpaper, that was recognised incorrectly as quality problem.

Tip: clean the glue in the joint after construction.

Hard scraper can be used in the construction of gold foil paper, leading to surface damage or scratch of gold foil, which is mistaken for quality problem.

Tip: construction tools should be selected for different materials and various parts.

During the structure of the gold foil paper, the white paste is mistakenly infected with the surface of the gold foil, leading to the gold film to reduce its luster (the white paste will form a mist film on the top of gold film and cannot be wiped), which is recognised incorrectly as quality problems.

Suggestion: gold foil is beautiful, but she’s also scared of glue.

After the metope brushed varnish, did not wait for varnish to dry fully then paste wallpaper, cause varnish by bottom paper infiltration surface paste, produce chemical response, form similar to the protruding granule of measles shape, mistake is a quality problem;

Clew: metope will not dry structure but big avoid

After wallpaper is pasted, open a window immediately ventilated, bring about wallpaper dry shrink 45252804152 dff5d3ae95 too fast, form juncture is apparent, mistake is quality problem;

Tip: end up being gradual and don’t be impatient.

Because wall seeps water, provide about wallpaper to paste over time of time, begin by bottom paper mildew, the secretion of mould and paste produce chemical reaction, bring about wallpaper surface large area discoloration, appear red spot or blue spot, and mistake is quality problem.

Due to the dependence on warm and humid environment for mold development, this type of scenario often occurs in rainy and high-temperature periods, which generally occurs 1st in the internal section of the wall structure with discharge pipes or near eaves and Windows.

Tip: it is very important to protect the wall from dampness, especially the wallpaper base paper manufactured from pure paper and non-woven cloth ought to be waterproof.