Many owners have no idea how to deal with the older wallpaper about the wall when replacing the wallpaper; if you continue to paste brand-new wallpaper on the old wallpaper, the old and previous wallpapers may fall off the wall together because of the wetness of the adhesive. The ultimate way to do this can be to strip the outdated wallpaper to ensure that the wall covering sticks to the wall more firmly.
Here are some methods to uncover old wallpapers.
Peelable wallpaper
1. Pick and choose an inconspicuous corner near the top of the wall and utilize the tip of the utility knife to get the wallpaper.
2. Try to be near to the wall, pinch the part of the wallpaper, and make an effort to remove it from the wall. Strip the wallpaper in your path, making it easier to take away the wallpaper. Whether it’s a peelable wallpaper, the wallpaper will detach from the wall so long as you are strenuous and moderate.
Cut and infiltrate
1. Use a computer program knife, razor blade or wallpaper scraper to cut the outdated wallpaper horizontally, each slit is about 20 or 25 cm apart.
2. Apply drinking water or wallpaper remover and wait around a few minutes for the wallpaper to totally saturate.
3. Repeat the same process on another wallpaper strip, then return to the first strip and re-wet it throughout with the formulation.
4. Start stripping the wallpaper with a multi-purpose edging knife with a 8.9 cm wide, movable blade. Beginning with a slice horizontal wallet, the blade is usually positioned under its upper advantage and the blade is at an angle of 30 degrees to the horizontal, and the sliding blade scrapes the wetted wallpaper. A wallpaper this is the same width as the squeegee will fall off the blade and roll onto the squeegee as the blade pushes down.
5. Continue to push down before wallpaper can’t be taken off. If the scraped wallpaper tape breaks, re-infiltrate this area and begin to scrape another tape.
Steam method
It is not easy to peel off aged wallpaper. You can lease a steam engine, nevertheless, you still need to use a wide-blade putty knife to scrape most of the wallpaper.
1. After the water is warm, press the steam plate on the wall before wallpaper on the advantage of the steam plate becomes dark because of moisture. Focus on a strip of paper and steadily peel off the wallpaper from top to bottom.
2. After steaming half of the paper strip, use a nail or a computer program knife to draw up the part of the very best of the wallpaper and tear off the wallpaper. If the wallpaper cannot be removed, it can be scraped off with a wall structure scraper. You may want to steam the same area twice or 3 x to loosen the adhesive for the longer months of the wallpaper.
For waterproof coatings, cleaning the wall paper glue with alcoholic beverages will not cause much damage to the wall. Rather, the volatilization of alcoholic beverages can minimize the damage to the wall structure. But one thing to note is that the focus of alcohol should not be too high. In any other case, the volatility is too large, and it is easy to make the white wall structure turn yellow or black. This is an extremely bad phenomenon.
This method uses physical friction. But because salt can be a white crystal, you don’t need to worry about the unusual color that the friction brings to the wall structure. In the process of rubbing, you can use white gauze or fabric that can keep salt, pack a little Original Wall covering packet of salt, softly rub, slowly you will see that the glue still left on the wall paper is gradually disappearing, and stuck in On the top of the fabric, you 44185385081 826863a220 merely need to rub and stop to remove the glue from the gauze. The next thing is not to be said.