We often have these and other complications when we put up our wallpaper. Especially the friend that a great deal of need to stick wallpaper of oneself begin function, it is to stick to one’s inclinations even more, found to stay finally only constantly got a few little blemish.

In fact, as long as construction attention, these problems can be avoided. Today, a few pick and choose out all these complications and focus on resolving them!

Basal membrane layer peeling

1) before brushing the foundation film, check whether the wall is regular, zero powdering and zero hanging level.
2) whether there are minor splits in the wall structure.
3) whether the construction temperatures is above 5 levels.
4) if the initial brush is too heavy, brush the second one before drying. The drying out time of the internal and outer layers may trigger peeling.
5) whether the bottom film can be too thick, drinking water may be added for comfort. Brush the base film once again after sanding with sandpaper.

The treatment of substrate film has great influence on the wallpaper effect, and the most immediate effect is on the stability of the wallpaper. Consequently, the substrate membrane must end up being treated according to the requirements of the instructions and mixed with the actual PVC Wallcoverings circumstance.

The glue overflow

Glue overflow is a very common trend in the procedure of pasting wallpaper, in the structure procedure, we should try our best to avoid the overflow of glue through paper record, the paper picture is relatively simple to clean, can not make use of paper recording, all the wallpapers other than the paper video tape suggested to make use of paper cassette construction.

1) wipe with a damp cloth or sponge, ideal for scrubbing wallpapers.
2) absorbent with dry out towel, ideal for wallpapers whose surface may not be touched with water.
3) absorbent with a wet sponge, ideal for wall papers with granular surface area.

Blot at bottom joint

The treatment of wallpaper joint is the key web page link of wallpaper construction all the time, a lot of professional construction professionals have their own tricks. For the layman, in the construction of particular interest. When adhering picture, glue do not arrive out totally, accumulate at juncture, period is normally long glue and wallpapers rise response.

Solution: take a little container of 60-80 degree boiled drinking water and put a bottle of light vinegar to it all. When the drinking water cools, rinse it at the joint. (regional test is normally recommended) the wallpaper will end up being more effective in 1-2 weeks, and 80% remnants can become eliminated.

The wallpaper shrinks and warps

Picture contraction phenomenon is mainly the employees in the building of 28908271187 a73c8eb080 loose bones, resulting in a later period of this issue, and workers with the building technology. Because wallpaper can be produced by timber pulp, possess the characteristic of lumber damp bilge dry shrink, functionality is not especially steady, after heading up glue liquid can have particular dilatancy, produce systole in drying out process. Although the extension can not really be controlled, employees can control the contraction during construction.

Most wallpapers contractions are unseen, unless the seams are insufficient. In this case, it is usually possible to source overlapping parts at joint parts. Usually, 1-3 cm of overlapping parts at bones are better.

If you have already contracted, the fix process is relatively simple. Dip the joint for 10 moments with a moist towel and choose up the wallpaper with the tip of the wallpaper knife. If the connection of the wallpaper surface area is definitely metallic surface area, scraping quickly makes the picture surface reduce original appeal and switch dark, damage the wallpaper surface area gorgeous, it is definitely not really suggested to operate.

The wallpaper moldy

1) the wallpaper is moldy and usually provides places on the wallpapers surface.
(1) water seepage should be checked.
(2) whether the glue is completely dry.
(3) whether there is definitely drinking water and air flow in the wallpaper for a lengthy time, which will cause mildew when it reacts with glue.
(4) high humidity.
(5) moist wallpaper paste.

Mould of picture is the issue that the person that stays wallpaper concerns, also end up being to appear after solve problems coefficient a single of the biggest problems, accordingly, this type of problem, want with prevent provide priority to. It is normally best to prevent moist and damp function in advance.

So, after picture appears this type of problem, do not really possess solution? Of training course not really.

2) treatment method
(1) the mildew point is little. It is usually suggested to clean it with fertilizer or detergent and dried out it with a hair dryer.
(2) with bleach, it all is usually simple to irritate the skin and might trigger the wallpaper to lose color. It is definitely not suggested to make use of.
(3) if the mildew stage is certainly huge, the wallpapers should be replaced. If the drinking water seepage is triggered by the wall, this issue should end up being resolved completely before Posting.